New-Jersey Retro-reflecting Barrier
One of two-faced retro-reflectors for vertical signalling.
Mainly used on New-Jersey barriers.
Available in different base structure and reflector colours, according to the needs of the clients.
|Reflector surface||77×117 mm|
|Base surface||87×92 mm|
|Coefficient of Retro-reflection||950 Ra (cd/lux/m2)|
|Fixing on barrier, wall, road surface, … with 2 or 4 screws|
|Colours for the reflecting surface||White, orange, red, blue and green|
|Colours for the fixing surface||Black, brown and green|
|Tightness between the base and the reflecting plates|
|Resistant to adverse climatic conditions|
|Flexible base. Adaptable to curved surfaces|
On traffic direction division barriers (concrete New Jersey barrier, metallic barriers, …)
On tarmac for slip road signalling
Toll entrance signalling
Inside walls of parking lots
Footpath signalling, on side walls or wooden fences
With 2 or 4 screws, or riveted directly through the rubber base
Outdoor conditions and corrosion-resistant
Water-tightness in the filtering of water between the components
Rust-free thanks to the absence of metallic riveting
Specially adapted to cold and salty atmospheres
Good response to impact due to the base’s flexibility